TP-Link TD-W8151N User Manual page 26

150mbps wireless n adsl2+ modem router

Hide thumbs Also See for TD-W8151N:

Table of Contents

TD-W8151N

Static IP Address

Select this option if your ISP provides static IP information to you. You should set static IP address,

IP subnet mask, and gateway address in the screen below (shown in Figure 4-6).

Note:

Each IP address entered in the fields must be in the appropriate IP form, which is four IP octets

separated by a dot (x.x.x.x), such as 192.168.1.100. The Router will not accept the IP address if it

is not in this format.

PPPoA/PPPoE

Select this option if your ISP requires you to use a PPPoE connection. This option is typically used

for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE

connection. Select Static PPPoE to use a static IP address for your PPPoE connection. Please

enter the information accordingly.

150Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-6

Table of Contents