NETGEAR RP614 - Web Safe Router Reference Manual page 23

A login window shown below opens:
Figure 2-5: Login window
3. Connect to the Internet
Figure 2-6: Setup Wizard
You are now connected to the router. If you do not see the menu above, click the Setup
a.
Wizard link on the upper left of the main menu.
Click Next and follow the steps in the Setup Wizard for inputting the configuration
b.
parameters from your ISP to connect to the Internet.
Note: If you choose not to use the Setup Wizard, you can manually configure your
Internet connection settings by following the procedure
Internet Connection" on page
Unless your ISP automatically assigns your configuration automatically via DHCP, you
will need the configuration parameters from your ISP as you recorded them previously in
"Worksheet to Record Your Internet Connection Information" on page
Connecting the Router to the Internet
Reference Manual for the Model RP614 v2 Web Safe Router
2-16.
"Manually Configuring Your
2-3.
2-7