NETGEAR RP614 - Web Safe Router Reference Manual page 21

Connect the Ethernet cable from your cable or DSL modem to the Internet port (A) on the
c.
Model RP614 v2.
Figure 2-2: Connect the cable or DSL Modem to the router
Connect the Ethernet cable which came with the router from a Local port on the router (B)
d.
to your computer.
B
Cable/DSL Web Safe Router RP614
Figure 2-3: Connect the computers on your network to the router
Note: The RP614 v2 router incorporates Auto Uplink
will automatically sense if the cable should have a normal connection or an uplink
connection. This feature eliminates the need to worry about crossover cables because Auto
Uplink will make the right connection either type of cable.
Now, turn on your computer. If software usually logs you in to your Internet connection,
e.
do not run that software or cancel it if it starts automatically.
Connecting the Router to the Internet
Reference Manual for the Model RP614 v2 Web Safe Router
Cable
or DSL modem
A
Cable/DSL Web Safe Router RP614
Cable or
DSL modem
TM technology. Each Ethernet port
2-5