NETGEAR RP614 - Web Safe Router Reference Manual page 108

Reference Manual for the Model RP614 v2 Web Safe Router
The TCP/IP Control Panel opens:
From the "Connect via" box, select your Macintosh's Ethernet interface.
2.
From the "Configure" box, select Using DHCP Server.
3.
You can leave the DHCP Client ID box empty.
Close the TCP/IP Control Panel.
4.
Repeat this for each Macintosh on your network.
5.
MacOS X
From the Apple menu, choose System Preferences, then Network.
1.
If not already selected, select Built-in Ethernet in the Configure list.
2.
If not already selected, Select Using DHCP in the TCP/IP tab.
3.
Click Save.
4.
C-16 Preparing Your Network