Wizard-Detected Fixed Ip (Static) Account Setup - NETGEAR DG834 - ADSL Firewall Router Reference Manual

Wizard-Detected Fixed IP (Static) Account Setup

If the router determines that your Internet service account uses Fixed IP assignment, you will be
directed to the page shown in
Figure 3-14: Setup Wizard menu for Fixed IP address
If required, enter the Account Name and Domain Name from your ISP.
1.
Choose "Use Static IP Address" or "Use IP Over ATM" (IPoA — RFC1483 Routed)
2.
according to the information from your ISP. If you choose IPoA, the router will be able to
detect the gateway IP address but you still need to provide the router IP address.
Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP's gateway
3.
router. This information should have been provided to you by your ISP. You need the
configuration parameters from your ISP you recorded in
Information" on page
Enter the IP address of your ISP's Primary DNS Server. If a Secondary DNS Server address is
4.
available, enter it also.
DNS servers are required to perform the function of translating an Internet name such as
www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must
obtain DNS server addresses from your ISP and enter them manually here.
Click Apply to save the settings.
5.
Connecting the Router to the Internet
Reference Manual for the Model DG834 ADSL Firewall Router
Figure 3-14 below:
3-4.
"Record Your Internet Connection
3-13