Casio XJ-460 - 1 User Manual page 28

User Maintenance
4.
Loosen the lamp cover screws, and
then remove the lamp cover.
6.
Use the lamp cartridge handle to pull
the lamp cartridge from the projector.
8.
Secure the lamp cartridge with the three screws.
9.
Return the lamp cover to its original position, and secure it with the two screws.
After replacing the lamp, be sure to perform the procedure under "Resetting the Lamp
Time" on page E-29.
5.
Lamp cover
7.
E-28
Loosen the three screws securing the
lamp cartridge.
Screws
Insert the new lamp cartridge as far as
it will go, as shown in the illustration.
After inserting the lamp cartridge, lay its
handle down in the position shown in
the illustration under step 5 on this
page.
Never touch the lamp with your hand.
Doing so can cause the lamp to rupture
and shorten its life.
Lamp cartridge
Make sure the
grooves on either
side of the lamp
cartridge align with
the grooves of the
lamp housing.