Getting Ready
Setting Up the Projector
Locate the projector on a desk, table, or stand that is firm and level. Make sure to allow
sufficient space around the sides and back of the projector for proper ventilation.
The following illustrations show how the projector should be oriented for optimum projection
relative to the screen.
Viewed from Above
The center of the
projector's lens
should be aligned
with the horizontal
center of the screen.
You can place the projector on a surface that is angled up to 30 degrees up or down
during use. Angling the projector more than 30 degrees up or down can cause rupture or
premature aging of the projector's lamp, or malfunction of the projector.
Getting Ready
Screen
Viewed from the Side
Make sure the
projector is at a
right angle to the
screen.
E-14
Screen