Label Description; Typical Networking Introduction - Haier Smart Cube Energy Controller Home User

2.3 Label Description

Symbols

2.4 Typical Networking Introduction

• Our company's products can be used for Home energy storage system. The Home energy storage system consists of
photovoltaic panels, inverters, battery packs, master control switches, loads, power grids, etc.
• The main function of Home energy storage system is to store the direct current generated by photovoltaic panels into
battery packs. Or alternatively, the electricity in the photovoltaic system and the battery pack can be converted into
alternating current for use by the load or incorporated into the grid.
Definition
Danger! High Voltage High voltage exists inside the equipment when powered
on. Do not open the casing when the equipment is running. Any maintenance or
servicing operations must be performed by trained and skilled electrical
engineers.
Warning! Life at risk.The equipment has potential hazards after running. Take
proper protection when operating the equipment.
After the equipment is powered off, the discharge of internal components is
delayed. Wait 10 minutes until the equipment is fully discharged according to
the label time.
Warning! Risk of burns.The surface of the heat dissipation area is hot when the
equipment is running. Do not touch it to avoid burns.
Please refer to the instructions to operate the equipment.
Earthing mark
9
User manual