Recording Precautions; Focusing - Casio QV-4000 User Manual

IMPORTANT!
• In any of the following cases, the message "One mo-
ment please..." appears on the display after you
record each image as it is saved to the memory card.
— When you are recording TIFF (uncompressed) im-
ages (page E-95)
— When you are recording a movie or panorama
(pages E-91, 93)
— When you are recording using certain Best Shot
scene setups (page E-76)
— When the low battery indicator is on the dis-
play while you are using a CompactFlash card
(page E-33)
— When the low battery indicator is on the dis-
play while you are using an IBM Microdrive (page
E-33).
• Recording images in the Full Auto Mode causes a
number of camera settings to be made automatically
in accordance with shooting conditions. See "Full Auto
Mode Settings" on page E-154 for more information.
BASIC IMAGE RECORDING

Recording Precautions

• Never remove the camera's batteries, disconnect the AC
adaptor, or remove the memory card from the camera
while it is saving images to its memory card. Doing so not
only causes a loss of the image being saved, it can also
corrupt images already stored on the memory card.
• Fluorescent lighting actually flickers at a frequency that
cannot be detected by the human eye. When using the
camera indoors under such lighting, you may experience
some brightness or color problems with recorded images.

Focusing

The Full Auto Mode uses Multi-area AF, which measures
three distances and automatically focuses on the subject
nearest to the camera. Note that the focusing range is ap-
proximately 30 cm to .
IMPORTANT!
• You cannot select a different focusing method when
using the Full Auto Mode (Page E-61).
E-47