Turning The Camera On And Off; Power Save Settings - Casio QV-4000 User Manual

Turning the Camera On and Off

Rotate the power/function switch to turn camera power on
and off.
: Turns on power and enters the REC mode.
: Turns on power and enters the PLAY mode.
OFF : Turns off power.
IMPORTANT!
• Never align the power/function switch with
the lens cap is on the lens.
• Never align the power/function switch with
the lens is facing downwards towards the ground.
• To restore camera power after it has been turned off
by auto power off, rotate the power/function switch to
OFF and then back to
GETTING ACQUAINTED
while
while
or .

Power Save Settings

The settings described below let you specify sleep and auto
power off trigger times that help to conserve valuable battery
power.
AUTO POWER OFF
Auto Power Off turns off camera power if no operation is
performed for five minutes in the PLAY mode. In the REC
mode, you can specify an Auto Power Off trigger time of
two or five minutes.
SLEEP
The monitor screen enters a sleep state if no operation is
performed for a specified amount of time in the REC mode.
Pressing any button immediately wakes up the monitor and
restores normal operation. You can specify 30 seconds, 1
minute, or 2 minutes before the sleep state is triggered, or
you can turn off this setting entirely.
E-35