Flycam B-FLCM-FLN-01 Assembly Manual

Basic flowline with 180 rotation

Download this manual

Basic Flowline with 180° Rotation

(B-FLCM-FLN-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Flycam Basic Flowline Camera Support Rig

Bag Packing

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Need help?

Do you have a question about the B-FLCM-FLN-01 and is the answer not in the manual?

Page 1 What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Flycam Basic Flowline Camera Support Rig Bag Packing All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Page 2 Flowline Rig Setup  Connect Section-1 of Support Jacket with Section-2 of Support Bar by simple push-fit technique. Section-2 Section-1  Remove side knobs of Section-2. Join Section-3 with Section-2 and tighten the Section-3 knobs back. Side knob of Section-2 ...
Page 3 Loosen knob at Support Bar and adjust the position of camera according to your eye-level, if required. YOUR FLYCAM BASIC FLOWLINE WITH 180° ROTATION ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.