M
M
>
T
(T
) T
AIN
ENU
EMP
EMPERATURE
AB AND
Temp (Temperature) Tab
The Temp tab displays the water temperature log (if equipped with a temperature
sensing transducer or receiving NMEA Sonar temperature data). The chart reads
from right to left, so that the most recent temperature measured appears on the far
right side of the chart. The dotted grid lines within the chart indicate intervals in
the temperature scale and the duration of time.
The following settings are available:
• Log and Graph Scale—sets the temperature range (in degrees) for
displaying the log. Select Auto to have the unit automatically determine
the best range, or select a span of 2, 4, 6, 8, or 10 degrees. Use the Reset
button in Auto mode to reset the automatic range.
• Log Duration—sets how fast or slow the temperature log scrolls; the
shorter the time duration, the faster the temperature log scrolls. Select a
duration from 1 minute to 2.5 hours.
70
S
T
ONAR
AB
Sonar Tab
The Sonar tab contains setup options for the Sonar Page. The Sonar Page appears
only if you have the Sonar check box selected on the Main Menu—System tab.
See the "Using Sonar" section on page
70
for more information.
GPSMAP 3205 Owner's Manual