› Ensure that only trained staff work with the device� A copy of the complete declaration of conformity or further declarations of conformity can be › Follow the safety instructions, guidelines, occupational health and safety and accident requested at sales@ika�com� prevention regulations� Warning! Explication of warning symbols ›...
› Pull out the power plug when changing or handling the dispersing tool� › Only dispersing tool approved by IKA may be used� › Safe operation is only guaranteed with the accessories described in the ”Accessories” chapter�...
Intended use Useful information /// Use Dispersion is the dissolution and diffusion of a solid, liquid or gaseous phase in a liquid that is not consolute with that phase� When used in combination with one of our recommended dispersing tools, the device is a The rotor/stator principle: high-speed dispersing and emulsifying device capable of handling free-flowing and liquid Due to the high rotation speed of the rotor, the medium to be processed is automatically drawn...
› Any damage should be notified immediately to the shipping agent (post office, railway network or logistics company)� d ig it a T 18 mini digital Power cord set Extension arm Holding band /// Securing the device to the cross sleeve...
/// Securing the dispersing tool /// Positioning the device Click /// Securing the vessel to the stand > 10 mm > 10 mm < 10 mm Notice! Notice! The filling level of the medium must be at The distance between the dispersing tool and least 10 mm above the lower overflow hole the vessel bottom should not be less than of the shaft�...
Attaching the brackets to the desktop power supply /// Connecting to the power The brackets can prevent the desktop power supply from liquids on the table� If required, the desktop power supply can be attached to a horizontally aligned pole using the brackets and the holding band supplied�...
Operator panel and display /// Explanation of the control elements /// Explanation of symbols on the working screen Display Display of the set parameters of the device� Operating mode symbol Indicate the device is in operating mode (A, B or C)� Switch between different device functions: Lock button symbol Indicate the settings of the device is locked�...
Operation /// Starting device function Notice! Observe the ambient conditions (temperature, humidity etc�) listed under “Technical Data”� /// Switching on /// Locking/unlocking the settings /// Setting the speed › Locking the settings max. min.
/// Activate standby mode › Unlocking the settings Even in locking status, the device can be stopped or switched off by pressing the control knob (C) or standby button (D)� /// Stopping the device › After stopping the device function, the last speed setting is shown on the display� ›...
Menu navigation and structure /// Menu details /// Menu navigation Counter/timer: Setting and confirming the timer value or counter in stopped or operating status: › Activating the "Timer/Counter" setting� › Activate the editing of menu option by touching multifunction button (B) shortly� ›...
First, download the latest driver for IKA devices with USB interface from: restart by itself� www.ika.com/ika/lws/download/usb-driver.zip. Install the driver by running the setup file� Connect the IKA device through the USB data cable to the PC� The data communication is via a virtual COM port� Device information: Note: The USB driver is unnecessary for Windows 10 system�...
When ordering spare parts, please indicate: › Device type� › Serial number, see type plate� › Item and designation of the spare part, see: www.ika.com, spare parts diagram and spare parts list� /// Repairs Please send in device for repair only after it has been cleaned and is free from any materials which may constitute a health hazard.
› Carry out corrective measures� R 182 Cross sleeve › Restart the device� See more accessories on www.ika.com� Note: In case of a failure, press the control knob or start/stop button for 1 seconds to show the full error code� Permitted dispersing tools...
Subject to technical changes! Warranty In accordance with IKA Terms and Condition of sale, the warranty period is 24 months� For claims under the warranty please contact your local dealer� You may also send the machine direct to our factory, enclosing the delivery invoice and giving reasons for the claim� You will be liable for freight costs�...
Page 18
IKA Works Spain, S. L. Phone: +254 112 323 745 Phone: +254 112 323 745 Barcelona sales�kenya@ika�com sales�uganda@ika�com sales�spain@ika�com Discover and order the fascinating products of IKA online: www.ika.com IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide Technical specifications may be changed without prior notice�...
Need help?
Do you have a question about the T 18 mini digital and is the answer not in the manual?
Questions and answers