A copy of the complete EU Declaration of Conformity or further declarations of conformity can › Ensure that only trained staff work with the device� be requested at sales@ika.com� › Follow the safety instructions, guidelines, occupational health and safety and accident prevention regulations�...
China Switzerland › The device may only be opened by qualified and IKA approved experts� The device must be unplugged from the power supply before opening� Live parts inside the device may still be live for some time after unplugging from the power supply�...
Assembly Operator panel and display /// Operator panel Observe the ambient conditions (temperature, humidity, etc�) listed under “Technical Data”� › Connect the device to a socket� › Place a magnetic rod in a vessel that is penetrable for magnetic field lines and fill the vessel with the medium to be processed�...
Operation /// Display & Glass printing /// Start-up (OFF) Notice! › Several device settings can only be changed during the po- wer-up process (LEDs start to light green)� Green › The device have no power switch� The power-up process starts as soon as the plug-in power supply unit is connec- ted�...
Page 8
2� Direction of rotation of the motor [clockwise (CW) / counterclockwise (CCW)] 3�2 Calibration of the “Vessel detection“ with the vessel: › Press and hold the “Vessel detection“ button until the green LED stops flashing� This com- pletes the calibration including the vessel or attachment� ›...
Page 9
4� Device operates as leader or follower 5� Reverse rotation ON / OFF with interval time setting Automatic reverse rotation Leader / Follower L = Leader device Green F = Follower device (default setting) Green White White Leader Follower › Continue setting the interval time, after the reverse rotation function has been activated� Time setting Max.
Page 10
/// Selection of speed or torque display /// Stirring › Motor ON: White LEDs with tail, rotate › Motor OFF: White LEDs, do not rotate Monitor: Speed / Torque White ON / OFF (0 / 100 ... 3000 rpm) Torque Speed White White...
Page 11
/// Operation in Leader / Follower mode /// Operation in Leader / Follower mode: (L + F) > 4 x › Once a “Leader“ device has been configured in the stirring system, the “Follower“ devices are control- Notice! led synchronously. All keys including the vessel detection of the “Follower“ devices are deactivated. ›...
Correct location › For cleaning disconnect the mains plug! › Use only cleaning agents which have been approved by IKA to clean IKA devices� These are: water (containing surfactant) and isopropyl alcohol� › Wear protective gloves during cleaning the devices�...
Warning / Errors 3.Permitted minimum input voltage is too low Display shows the following warning indication� Solutions: 1. Motor overload - Change the position of the device� If the allowed motor power is overloaded by the user - Reduce the number of the units� application, the device automatically reduces the - Change the position of the power plug�...
Technical data Warranty › In accordance with IKA warranty conditions, the warranty period is 24 months� For claims General data under the warranty please contact your local dealer� You may also send the device direct to Nominal voltage 24 VDC our factory, enclosing the delivery invoice and giving reasons for the claim�...
Page 15
Phone: +84 28 38202142 Phone: +66 2059 4690 Phone: +90 216 394 43 43 eMail: sales�lab-vietnam@ika�com eMail: sales�lab-thailand@ika�com eMail: sales�turkey@ika�com Discover and order the fascinating products of IKA online: www.ika.com IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide Technical specifications may be changed without prior notice�...
Need help?
Do you have a question about the TWISTER and is the answer not in the manual?
Questions and answers