Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Beautiful Manuals
  4. Indoor Furnishing
  5. WL-BT-016
  6. Manual

Beautiful WL-BT-016 Manual

Free standing hutch
Hide thumbs

Advertisement

Quick Links

Download this manual
Free Standing Hutch
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Stock # WL-BT-016
ADULT ASSEMBLY REQUIRED
1-866-942-5362
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2023-06-29
LOT NUMBER:
DATE PURCHASED:
Complement for WL-BT-014
(Grooved TV Console sold separately)
Rev. 0001-A
/
/

Advertisement

loading
Need help?

Need help?

Do you have a question about the WL-BT-016 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Beautiful WL-BT-016

Summary of Contents for Beautiful WL-BT-016

  • Page 1 LOT NUMBER: DATE PURCHASED: Free Standing Hutch Stock # WL-BT-016 Complement for WL-BT-014 (Grooved TV Console sold separately) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

  • Page 2: Special Note

    M A X I M U M R E C O M M E N D E D W E I G H T L O A D S Maximum load weight on each of shelves is 22.7 kg / 50 lb. THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED.
  • Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Left Side Frame B- Right Side Frame (Qty. 1) (Qty. 1) C- Top Shelf D- Lower Shelf (Qty.
  • Page 4 Assembly Instructions Metal frame ① x 2 ② x 2 ③ x 2 NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. 1.
  • Page 5 Assembly Instructions The pilot holes face the same direction. Metal frame ① x 4 ② x 4 ③ x 4 3. Orient and attach the Lower Shelves (D) to the Left Side Frame (A) with two 32 mm Bolts (1), two Lock Washers (2) and two Flat Washers (3) per shelf.
  • Page 6 Assembly Instructions ① x 6 ② x 6 ③ x 6 4. Repeat the same process to attach the Right Side Frame (B) at the opposite end.
  • Page 7 Assembly Instructions ⑤ x 2 ⑥ x 2 ④ x 16 5. With the pilot holes as a guide, fasten the Shelves (C and D) to the Side Frames (A and B) by attaching four L-shaped Bracket (5 and 6) at the joints, using four 20 mm Screws (4) per bracket. 6.
  • Page 8 Assembly Instructions Wooden stud Wall Nylon strap Short screw Wall Metal bracket Long screw Floor leveler Tools required (not included): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit. 7. Ask for assistance to lift the assembled unit upright and position it near the final location. If necessary, adjust Floor Levelers to level the unit.
  • Page 9 Assembly Instructions Floor levelers 10. Remove the Floor Levelers pre-attached at the bottom of both Side Frames (A and B).
  • Page 10 Assembly Instructions NOTE: The metal plates provide an important safeguard against accidents. Make sure you attach the provided metal plates to the units with the screws to prevent the units from falling over. ⑦ x 8 ⑧ x 2 11. Ask for assistance to lift the assembled unit upright and properly position it onto the TV Console near the final location.

  • Page 11: Quality Guarantee

    Care and Maintenance  Use a soft, clean cloth that will not scratch the surface when dusting.  Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.  Using solvents of any kind on your furniture may damage the finish. ...
  • Page 13 NÚMERO de LOTE:__________ FECHA de COMPRA: Gabinete individual Modelo # WL-BT-016 Complemento para WL-BT-014 (Consola para TV con ranuras vendida por separado) ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compro.
  • Page 14 M Á X I M O P E S O R E C O M E N D A D O Carga máxima de cada repisa es 22.7 kg / 50 lb. ESTA UNIDAD DEBE UTILIZARSE CON LOS PESOS MÁXIMOS INDICADOS.
  • Page 15 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. A- Marco izquierdo B- Marco derecho (Cant. 1) (Cant. 1) C- Repisa superior D- Repisa inferior (Cant.
  • Page 16 Instructivo de ensamble Marco de metal ① x 2 ② x 2 ③ x 2 NOTA: Por favor no apriete completamente todos los pernos, hasta que termine con el ensamble de las partes. Después asegúrese de apretar todos los pernos. Esto hará el ensamble más fácil. 1.
  • Page 17 Instructivo de ensamble Los agujeros pilotos apuntan en la misma dirección. Marco de metal ① x 4 ② x 4 ③ x 4 3. Orientar y adjuntar las repisas inferiores (D) al marco izquierdo (A) con 2 pernos de 32 mm (1), 2 arandelas de presión (2) y 2 arandelas planas (3) por repisa.
  • Page 18 Instructivo de ensamble ① x 6 ② x 6 ③ x 6 4. Repetir el mismo procedimiento para adjuntar el marco derecho (B) al lado opuesto.
  • Page 19 Instructivo de ensamble ⑤ x 2 ⑥ x 2 ④ x 16 5. Con los agujeros pilotos como guía, sujetar las repisas (C y D) a los marcos laterales (A y B) adjuntando 4 soportes L (5 y 6) en las conexiones, usando 4 pernos de 20 mm (4) por soporte. 6.
  • Page 20 Instructivo de ensamble Viga de madera Pared Correa de Nylon Perno corto Pared Perno largo Soporte de metal Nivelador de piso Herramientas requeridas (no incluidas): Desarmador estrella, buscador de vigas, cinta métrica, lápiz, taladro y broca de 1/8 pulgadas 7. Pedir asistencia para poner la unidad ensamblada en el lugar deseado contra la pared. Si fuera necesario, ajustar los niveladores de piso para nivelar la unidad.
  • Page 21 Instructivo de ensamble Niveladores de piso 10. Retirar los niveladores de piso pre-adjuntados de la parte inferior de ambos marcos laterales (A y B).
  • Page 22 Instructivo de ensamble NOTA: Las placas de metal provén un salvaguardia contra accidentes. Asegurar de adjuntar las placas de metal provistos a las unidades con los pernos para prevenir que las unidades se caigan. ⑦ x 8 ⑧ x 2 11.
  • Page 23 Mantenimiento y Cuidados  Use una toalla suave y limpia para evitar daños y rayaduras.  Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruébela en un área que no sea visible para revisar su funcionamiento. ...