Advertisement
Available languages
Available languages
Quick Links
Rattan End Table
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Stock # WL-BT-002
ADULT ASSEMBLY REQUIRED
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2024-01-18
# WL-BT-025
1-866-942-5362
Rev. 0001-A
LOT NUMBER:
DATE PURCHASED:
/
/
Advertisement
Related Manuals for Beautiful WL-BT-025
Summary of Contents for Beautiful WL-BT-025
- Page 1 DATE PURCHASED: Rattan End Table Stock # WL-BT-002 # WL-BT-025 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions...
- Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S Maximum load weight on table is 36.3 kg / 80 lb. THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED.
- Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Table Top (Qty. 1) B- Lower Leg (Qty. 1) C- Upper Leg (Qty. 1) D- Top Glass (Qty. 1) (1) 1/4”...
- Page 4 Assembly Instructions ⑤ x 8 ⑥ x 4 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Align and attach four Metal Plates (6) to the Legs (B and C) with two 20 mm Screws (5) per plate. Tighten the screws into place with a Phillips screwdriver.
- Page 5 Assembly Instructions ② x 1 ④ x 1 ③ x 1 3. Combine the Legs (B and C) together and fasten into place with one 38 mm Bolt (2), one Lock Washer (3) and one Flat Washer (4).
- Page 6 Assembly Instructions ① x 8 ④ x 8 ③ x 8 4. Position the Table Top (A) upside down on a level and protective surface. 5. Align and attach the assembled Legs (B and C) to the Table Top (A) by inserting eight 25 mm Bolts (1) with the Washers (3 and 4) through the Metal Plates (6) and tightly screw into place.
- Page 7 Assembly Instructions 6. Lift the unit upright and position it at the desired location. 7. Put the Top Glass (D) onto the Table Top (A) gently and evenly.
- Page 8 Assembly Instructions Floor leveler 8. If necessary, adjust the pre-attached floor levelers at the bottom of Legs (B and C) to level the unit.
-
Page 9: Care And Maintenance
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. ... - Page 11 FECHA de COMPRA: Mesa lateral Rattan Serie # WL-BT-002 # WL-BT-025 ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compro. Por favor llame a nuestro departamento de ayuda al cliente teniendo su instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica:...
- Page 12 M Á X I M O P E S O R E C O M E N D A D O Peso máximo en la mesa 36.3 kg / 80 lb. ADVERTENCIA ESTA UNIDAD DEBE UTILIZARSE CON LOS PESOS MÁXIMOS INDICADOS. SI SE EXCEDE EL PESO MÁXIMO, PODRIA RESULTAR EN UNA INESTABILIDAD DE LA UNIDAD CAUSANDO POSIBLES LESIONES.
- Page 13 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. A- Tapa de mesa (Cant. 1) B- Pata inferior (Cant. 1) C- Pata superior (Cant.
- Page 14 Instructivo de ensamble ⑤ x 8 ⑥ x 4 1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas. Ensamblar la unidad en un piso alfombrado o en el cartón vacío para evitar rasguños. 2.
- Page 15 Instructivo de ensamble ② x 1 ④ x 1 ③ x 1 3. Combine las patas (B y C) y fíjelas en su lugar con un perno de 38 mm (2), una arandela de presión (3) y una arandela plana (4).
- Page 16 Instructivo de ensamble ① x 8 ④ x 8 ③ x 8 4. Coloque la parte superior de la mesa (A) boca abajo sobre una superficie nivelada y protegida. 5. Alinee y fije las patas ensambladas (B y C) a la superficie de la mesa (A) insertando ocho pernos de 25 mm (1) con las arandelas (3 y 4) a través de los soportes de metal (6) y atorníllelas firmemente en su lugar.
- Page 17 Instructivo de ensamble 6. Levante la unidad en posición vertical y colóquela en la ubicación deseada. 7. Colocar el vidrio superior (D) sobre la superficie de la mesa (A) de manera suave y uniforme.
- Page 18 Instructivo de ensamble Nivelador de piso 8. Si es necesario, ajuste los niveladores de piso preinstalados en la parte inferior de las patas (B y C) para nivelar la unidad.
- Page 19 Mantenimiento y Cuidados Use una toalla suave y limpia para evitar daños y rayaduras. Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruébela en un área que no sea visible para revisar su funcionamiento. ...
Need help?
Do you have a question about the WL-BT-025 and is the answer not in the manual?
Questions and answers