D-Link DSL-2641B - Wireless G Router User Manual page 63

Section 4 - Troubleshooting
REMOTE MANAGEMENT
This section allows you to enable/disable remote access to the router from the Internet. Remote access control allows you to configure access via
specific services. Most users will not need to change any of these settings.
To access the REMOTE MANAGEMENT setting window, click on the Remote Management button under the ADVANCED tab.
REMOTE MANAGEMENT SETTINGS
Check the Enable Remote Management box to enable the remote
management.
Input the Remote Admin Port listened by the web UI for the remote PC
to browse.
Select the Remote Admin Inbound Filter to filter the remote PCs who
want to use remote management.
REMOTE ACCESS CONTROL
Select the management services which you want to enable/disable on
your LAN/WAN interface.
Click on the Apply Settings button to apply settings.
Notice If you disable HTTP service, you'll not be able to access the
router's configuration window permanently.
D-Link DSL-2641B User Manual 63