D-Link DSL-2641B - Wireless G Router User Manual page 46

Section 4 - Troubleshooting
ADD INBOUND IP FILTER
Enter the Filter name and at least one of the following
criteria: Protocol, Source/Destination IP Address and
Subnet Mask, and Source/Destination Port.
Click on the Add/Apply button to add and apply settings.
Note: This section only applies when the Firewall is
enabled.
The Active Inbound IP Filter shows detailed information
about each created inbound IP filter. To remove an IP filter,
click on the Remove button (only appears when there is an
existing IP filter).
D-Link DSL-2641B User Manual 46