UNIVIEW Easy Series Quick Manual page 9

NOTE!
This function works within 3 minutes after the camera restores defaults. So, if the
camera is not paired successfully within this time, please restart the camera or try
other methods.
5.
Wait for the camera to get online.
 QR Code Pair
1.
Connect the camera to power.
2.
Press the RESET button on the back of the camera to restore factory default
settings.
3.
Right-click on the NVR and then choose Menu > Network > Wi-Fi AP.
4.
Click QR Code Pair, and follow the on-screen instructions to scan the QR code.
5.
Wait for the camera to get online.
 Use EZView
Please refer to 8.5 Pair Camera and NVR for detailed steps.
5 Playback
In the preview page, select the desired window, then right click and select Playback
to play the recording of the current day.
NOTE!
A 7*24 recording schedule is enabled by default. To set a recording schedule

manually, right click and select Menu > Storage > Recording and then set
recording type and time based on your needs.
If you choose Event type recording, you need to enable the corresponding alarm

function and configure alarm-triggered recording/snapshot first.
6 EZView
Please download EZView on the App Store (iOS) or on Google Play (Android) first.
8