Install Device; Hard Disk Installation - UNIVIEW Easy Series Quick Manual

1 Default IP, Username and Password
IP address:
Username:
Password:
2

Install Device

The illustrations are for reference only. The actual device may vary.

2.1 Hard Disk Installation

1. Loosen the screws and remove the
cover.
3. Connect data cables and power cables
to the disk.
NVR 192.168.1.30
IPC 192.168.1.13
admin
123456
NOTE!
For security, you are strongly recommended
to set a strong password of at least nine
characters including all three elements:
digits, letters and special characters.
2. Secure the disk by fixing the screws to
the screw holes shown in the figure.
4. Put the cover back in place and
tighten the screws.
1