Appendix; Technical Specifications - Cisco WS-C2950T-48-SI Hardware Installation Manual

Technical Specifications

Table A-1
lists the technical specifications for fiber-optic uplink ports.
Table A-7
Long-Reach Ethernet (LRE) switches.
the Catalyst 2950 LRE switches.
Catalyst 2950G-24-EI-DC switch.
Table A-1
Environmental Ranges
Operating temperature
Storage temperature
Operating humidity
Operating altitude
Storage altitude
Shock
Power Requirements
AC input voltage
DC input voltages for the Cisco RPS
Power System
DC input voltages for the Cisco RPS 675
Power consumption
Power rating
Physical Dimensions
Weight
Dimensions
(H x W x D)
1. This switch meets ASTM D3332.
2. RPS = redundant power system
OL-6156-01
through Table A-5 list the technical specifications for the Catalyst 2950 switches.
lists the regulatory agency approvals for the switches other than the Catalyst 2950
Table A-10
Technical Specifications for Catalyst 2950-12, 2950-24, 2950C-24, 2950SX-24, and 2950T-24
Switches
A P P E N D I X
Table A-8 and Table A-9 list the regulatory agency approvals for
lists the regulatory agency approval only for the
32 to 113°F (0 to 45°C)
–13 to 158°F (–25 to 70°C)
10 to 85% (noncondensing)
Up to 10,000 ft (3000 m)
Up to 15,000 ft (4570 m)
84 in. per sec (2.13 m per sec)
100 to 127/200 to 240 VAC
(autoranging) 50 to 60 Hz
2
300 Redundant +12 V
+12 V
30 W (maximum)
102 Btus per hour
0.05 kVA
6.5 lb (3 kg)
1.72 x 17.5 x 9.52 in.
(4.36 x 44.45 x 24.18 cm)
Catalyst 2950 Switch Hardware Installation Guide
A
Table A-6
1
@4.5 A
@4.5 A
A-1