Maintenance And Cleaning; Technical Data - multicomp pro MP013565 User Manual

9

MAINTENANCE AND CLEANING

Attention! Before performing any work on the equipment, pull the power plug.
9.1 Maintenance
Your Power Tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
9.2 Lubrication
Your power tool requires no additional lubrication.
9.3 Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
9.4 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.

Regularly clean the machine housing with a soft cloth, preferably after each use.

Keep the ventilation slots free from dust and dirt.

If the dirt does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.

10 TECHNICAL DATA

Voltage
Power supply
Air temperature / Flow
220-240V~ 50/60Hz
500 W
100L/min
I 300℃
II 500℃
200L/min
2
1
0
8