Download Print this page

multicomp pro MP740414 Quick Manual

Usb rechargeable soldering iron

USB Rechargeable Soldering Iron

Model: MP740414

Table of Contents

Need help?

Do you have a question about the MP740414 and is the answer not in the manual?

Page 1 USB Rechargeable Soldering Iron Model: MP740414...
Page 2 IMPORTANT SAFETY INFORMATION Please read these instructions carefully before use and retain for future reference • When using electrical appliances basic safety precautions should always be followed. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Page 3 • Clean off any dirt, rust or paint on the part you wish to solder. • Heat the part with the soldering iron. • Apply rosin-based solder to the part and melt it with the soldering iron. Note: When using non-rosin-based solder, ensure you apply a soldering paste to the part before applying the solder.
Page 4 CLEANING • Cleaning should only be done when the iron is switched off and at room temperature. • The iron may be cleaned with a damp cloth and a small amount of liquid detergent if necessary. • Never submerse the soldering iron in liquid or allow any liquid to enter the case. •...