Chapter 3
Configuring with the Command-Line Interface
Verifying the Host Name and Password
To verify that you configured the correct host name and password:
Enter the show config command:
Step 1
Router(config)# show config
Using 1888 out of 126968 bytes
!
version XX.X
.
.
.
!
hostname VG224
!
enable secret 5 $1$60L4$X2JYOwoDc0.kqa1loO/w8/
.
.
.
Check the host name and encrypted password displayed near the top of the command output.
Step 2
Exit global configuration mode and attempt to reenter it using the new enable password:
Router# exit
.
.
.
Router con0 is now available
Press RETURN to get started.
Router> enable
Password: guessme
Router#
If you are having trouble, ensure the following:
Tip
•
•
OL-5005-01
Caps Lock is off.
You entered the correct passwords. Passwords are case sensitive.
Configuring the Host Name and Password
Cisco VG224 Voice Gateway Software Configuration Guide
3-3