Advertisement
Quick Links
Piezoelectric Siren for indoor use.
All operation and functions are controlled by microprocessor,
that provides credibility and stability.
There are 3 different versions of the Eris Siren:
• ERIS: Audible power 105dB at 1 m.
• ERIS Plus: Audible power 85dB or 105dB at 1 m, plus LED Flash.
Provides different siren sound volume in case of alarm whether the system is
STAY or AWAY arming and also it can operate as emergency light in case of
power loss. Includes tamper switch with free contacts, that can be connected to
alarm control panel zone.
• Eris Fire: in red color, with flash and special sound, so it can be used with fire
alarm control panels. Audible Power 85dB at 1 m.
ERIS
PIEZOELECTRIC SIREN
FOR INDOOR USE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sigma ERIS
Summary of Contents for Sigma ERIS
- Page 1 Includes tamper switch with free contacts, that can be connected to alarm control panel zone. • Eris Fire: in red color, with flash and special sound, so it can be used with fire alarm control panels. Audible Power 85dB at 1 m.
- Page 2 Operation instructions of ERIS Plus The siren ERIS Plus, in addition of its function, as a common indoor siren, can operate in three different modes, in combination with three outputs (PGM) of the alarm control panel, programmed accordingly: 1. In "STAY" arming, the intensity of the siren is low (85 db) and the light of siren lights steadily to illuminate the space.
- Page 3 PCB on the back cover of the siren and finally place the front cover and press untill if closes firmly. Wiring ERIS Plus • Connect the Tamper terminals to a 24hours zone of the alarm control panel.
- Page 4 • Connect the 12V terminals of the siren to the power supply output of the alarm control panel. Please, make sure you use the correct polarity. Connecting ERIS PLUS to Sigma Control Panel • Finally, put the siren's cover and press to close well.
Need help?
Do you have a question about the ERIS and is the answer not in the manual?
Questions and answers