Setup And Operation - TECshow MINI BUBBLE MASTER II User Manual

5. SETUP & OPERATION
• Position the QTFX-B2 on a stable surface or
mount upright using the integral bracket.
• Pour bubble fluid directly into the front open
tank, taking care not to spill on electrical parts of
the machine.
• Connect the IEC mains plug.
• Switch power on at the rear panel to begin
producing bubbles.
• Switch off to stop producing bubbles
• Disconnect from mains when usage is finished
• Empty remaining bubble fluid back into container
or dispose as appropriate.
• Rinse fluid tray with water and wipe clean before
next use.
English Version | Tecshow BUBBLE MASTER MINI II
P. 5