Safety Symbol And Message Conventions - TECshow MINI BUBBLE MASTER II User Manual

2. SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING!
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE ANY COMPONENTS TO RAIN OR
MOISTURE. IF LIQUIDS ARE SPILLED INSIDE THE HOUSING (OTHER THAN IN THE FLUID RESERVOIR),
STOP USING IMMEDIATELY, ALLOW UNIT TO DRY OUT AND HAVE CHECKED BY QUALIFIED PERSONNEL
BEFORE FURTHER USE. AVOID IMPACT, EXTREME PRESSURE OR HEAVY VIBRATION TO THE CASE.
NO USER SERVICEABLE PARTS INSIDE – DO NOT OPEN THE CASE – REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL.
PLACEMENT
The BUBBLE MASTER MINI II has an open front
•
fluid tank and should be operated in an upright
position.
• Choose a position where the bubble output is
facing the area to be filled.
• Ensure easy access to the rear panel and to the
bubble fluid tank for refilling and cleaning. When
moving the unit around, take care not to spill the
contents of the tank inside the machine.
3. CLEANING
• Use a soft dry or slightly damp cloth to clean
the casing.
• Do not use strong solvents for cleaning the unit.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "angerous voltage" within the
product' s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance instructions in the literature
accompanying the product.
SAFETY
• Check for correct mains voltage and condition of
IEC lead before connecting to power outlet.
• THIS UNIT MUST BE EARTHED!
• Empty contents and rinse the bubble fluid tanks
after each use.
English Version | Tecshow NEBULA FLAT 81
P. 3