Using The Led Light; Changing The Image Size - Casio Exilim EX-TR100 User Manual

Using the LED Light (LED)
Procedure
Enter the REC Mode * MENU * LED
Use the LED light when shooting where lighting is dim. The effectiveness of the LED
light is reduced the further you are from the subject.
Auto LED lights automatically under dark shooting conditions.
On LED always lights.
Off LED never lights.
IMPORTANT!
• Do not turn on the LED light near a person's eyes and do not allow anyone to look
directly into the light.
• You should compose the image so the main subject is in the center of the image
when using the LED light.
• Since the camera is equipped with a wide-angle lens, the center tends to be
brighter while the periphery tends to be darker.
Changing the Image Size (Image Size)
Procedure
Enter the REC Mode * MENU * Image Size
This setting can be used to configure snapshot image size.
Image Size
(Pixels)
12M (4000 3000) Poster Print
x
3:2 (4000 2656)
x
10M (3648 2736) Poster Print
x
5M (2560 1920)
x
VGA (640 480)
x
• The initial factory default image size setting is 12M (12 million pixels).
• Selecting "3:2" records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
B
Suggested Print
Size and
Application
Poster Print
A4 Print
E Mail
Description
Good detail for better clarity even for
images cropped from the original on a
computer, etc.
Good detail
Image files are smaller, which is better
when attaching images to e-mail.
However, images are relatively coarser.
55
Advanced Recording Settings