Casio Exilim EX-TR100 User Manual page 121

Problem
Language selection
screen appears
when the camera is
turned on.
Buttons are not
responsive right
after the power has
been turned on.
Possible Cause and Recommended Action
1)You did not configure initial settings after purchasing the
camera or the camera may have been left with a dead
battery. Check the camera setup (pages 24, 100).
2)There may be a problem with the camera's memory data. If
this is the case, perform the reset operation to initialize the
camera's setup (page 103). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera's memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
121
Appendix