Casio Exilim EX-TR100 User Manual page 119

Problem
The LED light does
not light.
Camera powers
down during Self-
timer countdown.
The monitor screen
image is out of
focus.
There is digital
noise in images.
A recorded image
was not saved.
Though available
lighting is bright,
the faces of people
in the image are
dark.
Night shots come
out bad.
Subjects are too
dark when shooting
images in a
seashore or ski
area.
The image is out of
focus during movie
recording.
Possible Cause and Recommended Action
1)If the battery is dead, charge it (page 18).
2)LED light operation is disabled automatically whenever you
are shooting with a BEST SHOT scene, HDR Art and Slide
Panorama. Select a different recording mode (page 36).
The battery may be dead. Charge the battery (page 18).
1)You may be using "Macro" for scenery or portraits. Use Auto
Focus for scenery and portrait shots (page 61).
2)You may be trying to use Auto Focus or "Infinity" when
shooting a close-up shot. Use the "Macro" for close ups (page
61).
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)Shooting with a snapshot with a high ISO sensitivity setting
can increase digital noise in the image. If digital noise
becomes a problem, try changing the ISO sensitivity setting to
a lower value.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
battery as soon as possible (page 18).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Not enough light is reaching the subjects. Adjust EV shift to the
+ side (page 58).
Use the "High Speed Night Scene" BEST SHOT scene (page
47) when shooting at night.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Adjust EV shift to the + side (page
58).
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 109).
3)During High Speed Movie recording, focus is fixed at the
position where it was when recording started. To focus an
image, half-press the shutter button for Auto Focus before
you touch "b" (Movie) to start recording.
119
, charge the
Appendix