Table of Contents
Advertisement
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera's "mode memory" feature lets you specify the
power on default settings individually for the REC mode,
flash mode, white balance mode, ISO sensitivity, and
digital zoom mode. Turning on mode memory for a mode
tells the camera to remember the status of that mode when
you turn off the camera, and restore it the next time you
turn the camera back on. When mode memory is turned
off, the camera automatically restores the initial factory
default setting for the applicable mode.
The following table shows what happens when you turn
mode memory on or off for each mode.
Function
On
REC Mode
Flash
Setting when
White Balance
camera is
turned off
ISO
Digital Zoom
1.
2.
3.
Off
Snapshot
Auto
Auto
Auto
On
76
In the REC mode, press [MENU].
Select the "Memory" tab, select the item you
want to change, and then press [ ].
Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
IMPORTANT!
• Note that BESTSHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BESTSHOT mode, the camera's
Flash, White Balance, and ISO Sensitivity will be
configured according to the BESTSHOT sample
scene when you turn it back on again, regardless of
mode memory on/off setting.
• If you turn the camera off while in the Movie mode,
the flash will be turned off when you turn the camera
back on again, regardless of mode memory on/off
setting.
Select this setting:
On
Off
Advertisement
Table of Contents
