Table of Contents
Advertisement
OTHER RECORDING FUNCTIONS
REC Mode Camera Settings
Specifying ISO Sensitivity
Use the following procedure to select the ISO sensitivity
setting that suits the type of image you are recording.
1.
In the REC mode, press [MENU].
2.
Select the "REC" tab, select "ISO", and then
press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
To get this:
Automatic sensitivity selection
Conforms to ISO 64
Conforms to ISO 125
Conforms to ISO 250
Conforms to ISO 500
Select this setting:
Auto
ISO 64
ISO 125
ISO 250
ISO 500
72
IMPORTANT!
• Increasing ISO sensitivity can cause static to appear
inside an image. Select the ISO sensitivity setting
that suits your shooting needs.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
NOTE
• You can use the key customization feature (page 74)
to configure the camera so the ISO sensitivity setting
changes whenever you press [ ] and [ ] while in the
REC mode.
Advertisement
Table of Contents
