Download Print this page

3onedata IAP3500-2E-1GT1GS-LV Quick Installation Manual

Safety dual-frequency industrial wireless ap for mine

Advertisement

Quick Links

IAP3500-2E-1GT1GS-LV
Safety Dual-Frequency Industrial
Wireless AP for Mine
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the device for the first time.
1.
Wireless AP
2.
3.
Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
This product is a Gigabit safety dual-frequency industrial
wireless
AP
bare
board
for
IAP3500-2E-1GT1GS-LV
(2
2.4G/5G
combined antenna interfaces + 1 Gigabit SFP slot + 1 Gigabit
copper port, 1 9~24VDC power input).
【Panel Design】
Top view, main view and bottom view
1.
2.
3.
4.
Certification
mine.
The
model
is
dual-frequency
5.
6.
Location hole
2.4G/5G antenna combined interface
CONSOLE port
From bottom to top, the indicators are:
Power supply indicator PWR
-
Running indicator (RUN)
-
Alarm indicator (ALM)
-
2.4G wireless signal indicator (2.4G)
-
5G wireless signal indicator (5G)
-
Bridge signal strength indicator (Bridge)
-
WAN port indicator (Port1)
-
LAN port indicator (Port2)
-
Gigabit SFP slot (Port1, WAN/LAN port)
Gigabit copper port (Port2, LAN port)
7.
RESET button
8.
Terminal blocks for power supply input
【Mounting Dimension】
Unit: mm
Note Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
If the device is used in high temperature environment, it
is recommended to add thermal pad at the bottom of the
mainboard to transfer heat to the chassis for heat
dissipation.
【Power Supply Connection】
The device provides 3-pin 5.08mm pitch terminal
blocks for power input and supports 1 DC power

Advertisement

loading
Need help?

Need help?

Do you have a question about the IAP3500-2E-1GT1GS-LV and is the answer not in the manual?

Questions and answers

Summary of Contents for 3onedata IAP3500-2E-1GT1GS-LV

  • Page 1  IAP3500-2E-1GT1GS-LV 【Mounting Dimension】 Safety Dual-Frequency Industrial Unit: mm Wireless AP for Mine Quick Installation Guide 3onedata Co., Ltd. Address: 3/B, Zone 1, Baiwangxin High Technology Industrial Park, Xili, Nanshan District, Shenzhen Website: www.3onedata.com Tel: +86 0755-26702688 Fax: +86 0755-26703485 Note Before Mounting: 【Package Checklist】...
  • Page 2 supply input. This power supply supports anti-reverse Indicate Description Enter device’s username and password in the login connection and slow start. The definitions of power pin are window as shown below. transmitting data shown in the left figure, and the device power input range is 2.4G wireless signal is running 9~24VDC.
  • Page 3 Indicator Power indicator, running indicator, alarm Normal Power Power indicator, 2.4G indicator, 5.8G indicator, Temperature Transmission Enable Consumption Voltage Consumption of Power Current of Full Mean bridge signal strength indicator, interface (25℃) (VDC) Full Peak Load (dBm) Load indicator Radio Frequency 0.549 11.612 15.921...