Auto-Programming Operation - Casio CE-7000 Dealer's Manual

Auto-programming operation

To other terminal(s) through inline (Individual or all terminals)
6 7s 6 50s 6
PGM
Mode switch
Note: Before executing this command, terminal connection table program is necessary.
To other terminal(s) through inline (group terminals)
6 7s 6 51s 6
PGM
Mode switch
Note: Before executing this command, terminal connection table program is necessary.
To other terminal through COM1 port
6 7s 6 80s 6
PGM
Mode switch
To its internal flash memory
6 7s 6 71s 6
PGM
Mode switch
Note: You cannot override the same file.
If there is no enough room for auto-program, format its internal flash memory.
To memory cassette
6 7s 6 70s 6
PGM
Mode switch
Note: You cannot override the same file.
If there is no enough room for auto-program or if you use the memory cassette
for the first time, format the memory cassette.
CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual
All terminal
: : : : :
s 6
Terminal ID No. Command code
6s
All terminal
: : : : :
s 6
Group No. Command code
6s
: : :
a
(Execution)
Command code
6s
(Cancellation)
: : :
a
(Execution)
Command code
6s
(Cancellation)
: : :
a
(Execution)
Command code
6s
(Cancellation)
a
(Execution)
(Cancellation)
a
(Execution)
(Cancellation)
145