Sp-1300; Quick Scan 6000; Nci 6710 - Casio CE-7000 Dealer's Manual

Appendix (Peripheral configuration)

SP-1300

SW No. Function
1
Baud rate setting
2
3
Data length
4
Parity check
5 Parity
6 Handshake
7
Receive buffer size
8
Character code set
9
Pin 6 (DSR) reset signal
10
Pin 25 (INIT) reset signal
* Please select this option.

Quick scan 6000

Select these options:
1. Interface selection:
SNI RS-232C interface selection
2. Baud rate:
Baud rate = 9600 bps
3. Data format settings:
Parity = Odd
Stop bits = One
Data bits = Eight bits
4. Software control:
Hardware control = Enable CTS/RTS flow control
Software control = Disable Xon/Xoff
5. RS-232C ACK/NAK options:
ACK/NAK enable = Disable ACK/NAK
6. Setting symbology specific label identifiers:
Transmit label I.D. as prefix
"SNI RS232C" default value:
1. General features:
Audible signal = Enable
Power-up beeping = Enable
Beeper volume = Low
Beeper duration = 100ms
When to beep = Beep/LED after decode
Low power mode = Disable
Debug mode = Disable
Auto sense stand mode = Disable

NCI 6710

Follow the setup steps described in the user's manual of the scale to set the configuration.
We recommend the baud rate as 4800bps, even parity (the scale displays "48e"), and protocol as Cash register compatible
(the scale displays "ECR").
198
ON OFF
See baud rate setting
8 bits 7 bits
Disabled Enabled
Odd Even
DTR/DSR XON/XOFF
2k bytes * 35 bytes
Katakana PC437
Enabled Disabled
Enabled Disabled
2. RS-232 I/F settings:
3. Label transmit format config items:
4. Symbology:
5. UPC/EAN options:
DIP switch under the document table
ON
OFF 1 2 3 4 5 6 7 8 9 10
Baud rate setting
SW No.
bps 1 2
1200 OFF OFF
2400 ON OFF
4800 OFF ON
9600 ON ON
RS-232 I/F = N/A
SNI RS-232 I/F = Enable
Baud rate = 9600
Parity = Odd
Stop bit = 1
Data bit = 8
Hardware control = Use CTS/RTS flow control
Software control = Disable = Xon/Xoff
Intercharacter delay = 0
Keyboard wedge I/F settings:
KBD wedge I/F type = N/A
External keyboard/No keyboard = N/A
Send control characters = N/A
Intercharacter delay = N/A
Prefix = Disable
Suffix = Global D00
Label I.D. control = Transmit as prefix
UPC-A label I.D. = 4100
UPC/EAN = Enable
UPC-A to EAN-13 expansion = Expand
UPC-E to UPC-A expansion = Don't expand
EAN-8 to EAN-13 expansion = Don't expand
UPC-E to EAN-13 expansion = Don't expand