Subscribe to Our Youtube Channel
Related Manuals for ORKEL GP 1250 Agronic
Summary of Contents for ORKEL GP 1250 Agronic
- Page 1 USERS MANUAL Orkel Agronic GP 1250 Combi Balewrapper Orkel AS Postbox 84 N - 7321 Fannrem + + + + Always serial no. by spare part order! Serial no.: (Please see left rear main frame) From # XXXX00150...)
- Page 2 Dealers name and address: Delivery and warranty registration form has to be filled out of dealer together with customer. The dealer has to send one of the three forms back to the manufacturer. Without filled out and sent back form, the warranty is not valid.
- Page 3 The machine is CE-marked (declaration of conformity) in accordance to the machine directive. You have to read the Users manual and the Safety instructions carefully before using the machine. Orkel AS...
-
Page 4: Table Of Contents
WARRANTY Dear Customer: 1.0 Putting the machine to work Hydraulics Electronics Control box 2.0 Control box (program ver. 1.0) General Keypad Automatic wrapping Selecting the automatic operation mode Manual control of functions Manual control during automatic operation Manual control after interrupted automatic operation Display during manual control Display during automatic operation 2.10... -
Page 5: Declaration Of Conformity
Orkel DECLARATION OF CONFORMITY Orkel AS Pb 84. N - 7320 Fannrem hereby declare, that following product(s), Orkel Orkel Orkel Orkel Combi Balewrapper GP 1250 serial number ..............that is covered by this declaration, are in conformity with the following standards, or other normative... -
Page 6: Warranty
WARRANTY Orkel AS warrants this machine against any manufacturing faults for a period of 12 months from the date of delivery to the customer (farmer). If there is no other agreement between customer and dealer, the warranty is limited to: 1. - Page 7 N.B. Dealer must not sign on behalf of customer. This form must be returned to Orkel’s sales company/importer within 14 days of delivery to authorise warranty. ∀...
-
Page 8: Dear Customer
Dear Customer: The Agronic bale wrapper is an efficient and economical long-term investment. When designing the machine, the manufacturer has taken into account all applications of state-of-the-art technology in the field of agriculture. The structure of the machine is based on results obtained from a long period of research and testing work under the many different operating conditions. -
Page 9: Putting The Machine To Work
1.0 Putting the machine to work The machine has undergone tests and a test run at the factory. The flow adjustments of the machine's hydraulic system can, however, be easily changed. Therefore be specially careful always when using a machine after it has been unattended. The speed of the wrapping arm, for example, may be too high. -
Page 10: Control Box (Program Ver. 1.0)
2.0 Control box (program ver. 1.0) General • The control box receives its supply voltage via a cable, so normally it does not need a battery. In remote use it is operated by a 9 V battery. When the cable is not connected, the display does not operate either. -
Page 11: Automatic Wrapping
Automatic wrapping The text redy must be shown on the display. When bale is ready, push net button on balers controlbox. The automatic loading and wrapping operation starts by pressing the Start key twice. The bale chamber open, bale goes to loading device. When the bale activates the loading sensor, the machine loads the bale automatically. -
Page 12: Manual Control During Automatic Operation
Man+ Fast wrapping, 3 sec. at slow speed then fast Man– Chamber closing Man+ Chamber opening Manual control during automatic operation Automatic operation can be interrupted using the Man+ and Man– keys. If automatic operation is interrupted with the Man+ or Man– key, they can be used to control the current operation immediately as defined above. -
Page 13: Error Conditions
2.10 Error conditions Display Explanation Er.A2 Lift fork not in the mid-position, or not regoniced A6 when goes down. Er.A3 Table not in the mid-position Er.A4 Bale chamber not open Er.A5 Wrapping arm does not activate the sensor Film Film has been broken during fast wrapping or wrapping speed too high. Er.A7 Bale chamber lock open Er.A8... -
Page 14: Adjusting Film Overlap, Speed Of Wrapping And Other Operations
Adjusting film overlap, speed of wrapping and other operations • Valve no. 1 regulates the total oil flow to the machine. When turning the valve clockwise, the amount of oil used by the machine decreases. Movements become slower.( should be about ¼... -
Page 15: Side Tipper
4.0 Side tipper During wrapping the side tipper is located in a horizontal position behind the bale wrapper. When the table is being lowered, it is lowered to the ground. When the table is being raised, it rises up. Take care that the wrapping arm will not hit the side tipper during wrapping. - Page 16 6. When using a 500 mm film in the 750 mm stretcher, the stretcher must be fitted with an adapter. The adapter tube is fitted inside the film roll.
-
Page 17: Adjusting The Film Cutter
6.0 Adjusting the film cutter 1. Speed adjustment is made using valve no. 5. 3. Adjustment of knife height. 4. The position of sensor no. 5 can be changed in accordance with bale size so the film gets into the cutter. 5. -
Page 18: When The Film Runs Out In The Middle Of Wrapping
the conditions set for the REDY mode, an error message will appear on the display. • Check the number of revolutions and film overlap. A 120 cm bale requires about 13 revolutions for a wrapping of six layers (75 cm film,). Always ensure that the number of revolutions will be adequate when wrapping the first bale. -
Page 19: Maintenance
8.0 Maintenance Always before cleaning and servicing: Switch off the supply voltage and the oil flow. Stop the tractor's engine. Do not go under raised machine parts which are not safely supported. Before use check the tightness of all nuts and bolt Check tyre pressures. -
Page 20: Fault Finding
9.0 Fault finding If you search for an electricity fault, stop the tractor engine before fault finding. If this is not possible, keep out of the machine's movement range. The lift fork may drop even if the hydraulics were not switched on. Be careful with an open film cutter. If the bale wrapper does not operate correctly, always check first: supply voltage, cables, tractor's directional valve, quick couplings and pressure filter. -
Page 21: Wrapping Stops At Error Message Film
Wrapping stops at error message FILM - Is there any film in the stretcher? Sensors 11 and 12 detect whether the stretcher rollers rotate at fast wrapping. - Is the sensor at the correct distance? ( 1 mm) - Has the wrapping speed for the model been adjusted too high? Film overlap varies - Has the machine been adjusted precisely in accordance with the instructions? - Do the belts slip? -
Page 22: Valve Block
10 Valve block S low wrapping valve 10 Wrapper arm speed valve 2 Chamber Loading Film cutter T able Wrapping/ free circulation... -
Page 23: Extra Valve
11 Extra valve Extra lock valve for chamber An extra lock valve is mounted to ensure proper chamber locking. This to avoid influence from other functions and giving more safe and stabile locking of chamber. -
Page 24: El Scheme
12 El scheme Film sensor 2 Film sensor 1 Not in use T able on top S afety stop Chamber close Chamber open Chamber lock Loading not top Wrapper arm Chamber open T able middle Lift fork middle Not in use Not in use Loading sensor... -
Page 25: Oil Scheme
13 Oil scheme MOTOR BRAKE SLOW SPEED TABLE CHAMBER LIFT UP FILM HOLDERS OVER- TABLE MOTOR LAPPING ADJ. VALVE FILM HOLDERS TABLE SPEED SPEED ADJUST. VALVE ADJUST. VALVES CHAMBER-LOCK VALVE TABLE LOCK FILM HOLDERS LOCK VALVE VALVE MAIN FLOW ADJ. VALVE...
Need help?
Do you have a question about the GP 1250 Agronic and is the answer not in the manual?
Questions and answers