Table of Contents
Advertisement
Quick Links
The following instructions contain information about the construction and care of the Sun Stand for the Easy Sun
PARASOL. Please read through the instructions carefully before setting up your Sun Stand. The work described in these
instructions is intended only for persons with experience using the required tools. Damages caused by non-observance
of the instructions are excluded from any liability or warranty submission.
The Sun Stand is made from weather resistant and shockproof plastic and is intended to be mounted onto new or existing
foundations. The construction allows the Sun Stand to be removed at any time without great effort.
The manual contains information on the following topics:
* Assembly of Sun Stand for the Easy Sun Parasol
* Safety
* Care & Maintenance
* Wind Rating / Securing the Canopy
Malfunctions which could influence the safety and function of the umbrella must be rectified immediately.
All repairs described in the manual can be carried out by the consumer and we always recommend having a second
person assist as the umbrella it top-heavy. The repair information is intended for those person(s) who are competent to
safely use the tools described. Only carry out this repair work using suitable tools.
SUN GARDEN GmbH - Emsdettener Str. 223 - D-48485 Neuenkirchen - www.sun-garden.de +48 (63)289 89 00
Sun Garden USA 2023
Advertisement
Table of Contents
Related Manuals for sun garden Sun Stand
Summary of Contents for sun garden Sun Stand
- Page 1 The Sun Stand is made from weather resistant and shockproof plastic and is intended to be mounted onto new or existing foundations. The construction allows the Sun Stand to be removed at any time without great effort.
-
Page 2: Table Of Contents
6.4 Assembly - Reducer Socket..11 3.1 Umbrella Dimensions…....5 6.5 Assembly - Union Nut…....11 3.2 Sun Stand Dimensions....5 7.0 Care & Maintenance......12 4.0 SETTING UP THE SUN STAND……..6 7.1 Cleaning the Sun Stand…....12 4.1 Required Tools…....…...6 7.2 Maintenance….....…....12 4.2 Checking the Foundation...…..6 8.0 Storage…..........12... -
Page 3: Safety Information
Make sure your canopy is always closed AND secured to the pole when the umbrella is not in use or in windy conditions. Once the canopy has been secured, you can put on a protective cover. Sun Garden USA 2023... -
Page 4: Sun Stand Components
PARTS DIAGRAM 2.0 SUN STAND COMPONENTS All of our products undergo rigorous testing for quality and completeness before delivery. Check the contents of the Sun Stand before starting assembly. If any components are missing, please contact the seller. 2.1 Parts Diagram... -
Page 5: Dimensions
SUN STAND: DIMENSIONS 3.0 DIMENSIONS 3.1 Umbrella Dimensions 3.2 Sun Stand Dimensions Height: 18.1 inches Diameter: 12.8 inches Weight: approx. 12 lbs Sun Garden USA 2023... -
Page 6: Setting Up The Sun Stand
* B25 Concrete (at least) 4.2 Checking the Foundation If you intend to set up your Sun Stand on an existing foundation or concrete slab, you must first check the suitability by checking the following points below. The following points must be checked. -
Page 7: Making The Foundation
SUN STAND: SETTING UP (contd) 4.0 SETTING UP THE SUN STAND (continued) 4.3 Making the Foundation The foundation for the Sun Stand MUST be constructed of class B25 concrete. The smallest foundation size permissable is 25.5" x 25.5" x 19.7" (65... -
Page 8: Required Tools
(4) fixing holes on the foundation/slab. Remove the aluminum Floor Plate and drill the rawlplug holes into the foundation/slab. When drilling the rawlplug holes, ensure that: *the drill doesn't slip from markings *the holes are plumb *keep to minimum hole depth Sun Garden USA 2023... - Page 9 Knock the Floor Anchors into the foundation/slab until the bolt heads are level with the Floor Plate. Make sure you do not damage the bolt heads during the installation. Fix the Floor Plate by tightening the Floor Anchors. Sun Garden USA 2023...
-
Page 10: Installing Components
6.3 Assembly - Base Cone Tighten the Base Cone using a broom/mop handle or the Assembly Fixing Tube. When tightening, make sure the Base Cone locates in the guide edge of the Spacer (see detail). Sun Garden USA 2023... -
Page 11: Assembly - Reducer Socket
Screw the Union Nut no more than 3 turns so you can fit the Standing Pole into the Base Cone easily. Once the umbrella frame is in the base, hand-tighten the Union Nut making sure NOT to overtighten! Sun Garden USA 2023... -
Page 12: Care & Maintenance
Stand and its components at least once a year, either before setting up for the season or before storage. 8.0 STORAGE The Sun Stand components must be stored in a dry and frost free location over the winter months. 8.1 Disassembly * Unscrew the Union Nut and Base Cone.
Need help?
Do you have a question about the Sun Stand and is the answer not in the manual?
Questions and answers