Set The Dip Switch; Start Up The System; Parameters Setting And Checking On The Inverter - Pytes Solis S5 Series Installation And Configuration Manual

3. Set the DIP Switch

Set the DIP switch according to the version of 48100R you have, as
shown in table below.
Version of 48100R
A and B version
C version

4. Start up the System

Start up the battery.
Firstly, press the power button on, next press the SW red ring button
as shown in pic 3.1.

5. Parameters Setting and Checking on the Inverter

Pic 3.1
ADD setting
8