Advertisement
Advertisement
Table of Contents
Related Manuals for ALI Washtech M1C
Summary of Contents for ALI Washtech M1C
- Page 1 Operator Manual...
-
Page 2: Table Of Contents
WARNING WARNING Before installation and commisioning, you must read the safety instructions and warnings Before installation and commissioning, you must read the safety instructions and warnings carefully and all the warning labels attached to the equipment. carefully and all the warning labels attached to the equipment. IMPORTANT IMPORTANT WARNING... -
Page 3: Safety Instructions
Safety Instructions WARNING Equipment contains dangerous voltages and can be hazardous if installed or operated WARNING incorrectly. Non-compliance with warnings or failure to follow the instructions Before installation and commissioning, you must read the safety instructions contained in this manual can result in loss of life, severe personal injury or serious and warnings carefully and all the warning labels attached to the equipment. -
Page 4: Installation Checklist
Installation Checklist WARNING WARNING Installer must be suitably qualified and ensure compliance with all codes and standards Before installation and commissioning, you must read the safety instructions including AS/NZS3500.1. and warnings carefully and all the warning labels attached to the equipment. Unpack IMPORTANT •... -
Page 5: Installation Diagram
M1C Installation Diagram M1C INST 10-11-16 3 C 5 M1C - Operator Manual 15/03/20... - Page 6 M1C Operating Instructions START POWER DOWN START • Turn on at wall • Ensure the Filter (2) is in place • Ensure the Upstand (1) is in place and shut door • Press Power button for 3 seconds to turn machine on and begin the fill cycle OPERATION •...
-
Page 7: User Programming
User Programming The User Settings menu is accessed by pressing the UP and DOWN keys simultaneously for 5 seconds, the screen should then change to: POWER DOWN Press the POWER button to scroll between settings. Press the UP and DOWN keys to change a specific setting, Press the START button to return to the operator screen. -
Page 8: Troubleshooting
Troubleshooting If an error message appears on the control display first try turning the machine OFF for 30 seconds and then back ON - If the error message remains call for service. Issue Resolution Error 7 Fill failure - check drain upstand is fitted & water supply is turned on and good flow rate. - Page 9 M1C Wiring Diagram M1C WIRING DIAGRAM 090227 2/11/2017 1 B 9 M1C - Operator Manual 15/03/20...
-
Page 10: Accessories
PS PACK0109 22/03/17 ISSUE NO. REVISION DATE APPROVED BY: OPERATION M1C ACCESSORIES Accessories CHECKED 600 70080 CUPRACK 450mm PLASTIC 600 70081 DISHRACK 450mm PLASTIC C660503 CUTLERY CONTAINER G 600 60080 HOSE SS 2M 600 90154 SS LEG 63D x 225 - 325mm x M12 UNDER WIRING DIAGRAM FRONT... - Page 12 Information supplied in this manual is copyright. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical without the express permission of the author/publisher Distributed in Australia by Moffat Pty Limited 740 Springvale Road Mulgrave 3170 Victoria...
Need help?
Do you have a question about the Washtech M1C and is the answer not in the manual?
Questions and answers