Advertisement
Quick Links
Models EST-AH , EST-C
EST-AH-(EXT)
& EST-C-(EXT)
Quick Setup
Instructions
WARNING: Electrical and
plumbing connections
need to be made by a
licensed service person
and comply with all
Federal, State and Local
NORMAL-OFF DELIMER
Health, Electrical,
Plumbing and Safety
codes.
1
STEP
1
Connect dishmachine to hot water source
recommended 140 temperature (120
minimum temperature required).
PN: 10130.13
SWITCH
ON/OFF
POWER SWITCH
1/2" WATER
INLET
STEP
2
Connect a 2" drain pipe (not
supplied) from scrap accumulator
to floor or wall drain.
MODEL EST REAR VIEW
2
2" DRAIN
OUTLET
8"
WALL
DRAIN
FLOOR DRAIN
HARD WIRE
POWER SUPPLY
TUBE
3
STIFFENER
CHEMICAL
3
TUBING
STEP
3
WHITE
RED
Insert tube stiffener with chemical tubing
into each corresponding chemical
dispensers.
BLUE
07-2021
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ALI CMA EST-AH
Summary of Contents for ALI CMA EST-AH
- Page 1 Models EST-AH , EST-C MODEL EST REAR VIEW EST-AH-(EXT) & EST-C-(EXT) Quick Setup HARD WIRE POWER SUPPLY Instructions TUBE STIFFENER WARNING: Electrical and CHEMICAL plumbing connections TUBING need to be made by a licensed service person and comply with all Federal, State and Local NORMAL-OFF DELIMER Health, Electrical,...
- Page 2 Press the "FILL/START" switch. Hold in the Dishmachine must be level front and back to the doors will automatically activate the "FILL" position until the water overflows into ensure proper performance. machine. the scrap accumulator. 07-2021 an Ali Group Company The Spirit of Excellence...
Need help?
Do you have a question about the CMA EST-AH and is the answer not in the manual?
Questions and answers