Advertisement
Single Channel PoE Analog to IP Video Encoder
TV-VS1P (V1.0R)
SPECIFICATIONS
GENERAL
Video
Audio
GPIO
SD Slot
Pan/Tilt/Zoom
HARDWARE
Network
LED
Reset Button
Power Consumption
Power
Dimension
Weight
Temperature
Humidity
Certifi cations
REQUIREMENTS
Management Interface
To run Utility
Network Protocols
MANAGEMENT
Remote
Backup / Restore
• Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms ; BNC connecter
• Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter
• Line Input: 3.5mm microphone in jack
• Line Output: 3.5mm audio out jack
• S/N Ratio: < 60dB
• Format: PCM/AMR
• 2 Way audio supported
• Ground, GPIO in/out, DV12V output, RS485 TX+/TX-
• Supports SD/SDHC (up to 32GB)
• Protocol: Pelco D
• 32 presets
• Auto Patrol
• IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX
• IEEE 802.3af PoE
• Power, Link
• Push and release to reboot
• Push and hold for 5 seconds to restore to factory default
• 7 Watts
• 12V, 1.5A external power adapter (for non-PoE installation)
• 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.)
• 445 g (15.7 oz.)
• Operating: 0°C ~ 45°C (32°F ~ 113°F)
• Storage: -15°C ~ 60°C (5°F ~ 140°F)
• Max. 85% (non-condensing)
• CE, FCC
• Internet Explorer 6.0 or above
• Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
• TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP,
RTSP, RTCP
• Remote management supported
• Save/retrieve confi guration fi les
TV- VS1P
rev: 06.15.2011
Advertisement
