98SE, Mac OS X 10.1~10.4) / 512MB RAM or above (Windows Vista) Windows Vista/2003 Server/XP/2000/ME/98SE, Mac OS X 10.1~10.4 RS-232 device (e.g. modem) RS-232 Male to Female Serial Cable (Optional) Application Notebook Package Contents TU-S9 Quick Installation Guide Driver CD-ROM USB to Serial Converter (TU-S9) Serial...
2. How to Install Windows 2003 Server/XP/2000/ME/98SE Note: Do not connect the TU-S9 until instructed to do so. 1. Turn on your computer and wait until the Windows desktop appears. 2. Insert the Driver CD-ROM into your CD-ROM drive. 3. Go to Start > Run, type in E:\Driver\Win98_2003\Setup.exe...
6. Connect the Adapter to an available USB port of your computer. 7. Connect the Serial device to the TU-S9. Windows Vista 1. Turn on your computer and wait until the Windows desktop appears. 2. Connect the Adapter to an available USB port on your computer.
Page 6
TU-S9. Your installation is now complete. For detailed information regarding the TU-S9, please refer to the User's Guide included on the Driver CD-ROM or TRENDnet's website at www.trendnet.com To ensure the highest level of customer service and support, please take a moment to...
Yes, you can connect or disconnect the USB cable while the computer is on, because the USB interface is Plug-and-Play and hot-pluggable. If you still encounter problems or have any questions regarding the TU-S9 USB to Serial Converter, please contact TRENDnet’s Technical Support Department.
Page 8
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Need help?
Do you have a question about the TU-S9 and is the answer not in the manual?
Questions and answers