TRENDnet User's Guide
2. Connect an RJ-45 cable from a switch/router to the Ethernet port on the back
of the camera and connect the AC power adapter to the camera. Click Next to
proceed.
3. From the list of cameras that appears, select the camera you wish to configure
and click Next to continue. If your camera is not listed, ensure that it is
connected to both power and the network and click
network for your camera.
© Copyright 2012 TRENDnet. All Rights Reserved.
4. Login to your camera by entering the ID and Password. By default, both the ID
and Password are set to admin. Click Next to continue.
5. Enter a name for the camera in the Camera Name field. The name will be used
to identify your camera on the network. Enter the correct time for the camera
for the time zone it is in. If your camera is in the same time zone as the
to re-scan the
computer you are using, click the
to the camera. Click Next to continue.
TV-IP572P / TV-IP572PI
icon to copy the local time
6