Dynamic Dns - TRENDnet TV-IP572P User Manual

TRENDnet User's Guide
Under LAN Settings, select either DHCP Connection or Static IP Address. If you want to
setup PPPoE, click the PPPoE checkbox and enter the Username, Password, confirm the
Password and click Apply. The Status will change from Disabled to Enabled.
Under Port Settings, select the HTTP Port (80 is the default) and also select the RTSP
Port (554). Under UPnP, click the UPnP checkbox if you want to enable this function.
Click the UPnP Port Forwarding checkbox if you want to enable to set the ports. Select
the External HTTP port (the default is set) and select the RTSP port (the default is set at
554). If you are using a MAC check the Bonjour checkbox to enable this function. Click
Apply to set the changes.
© Copyright 2012 TRENDnet. All Rights Reserved.

Dynamic DNS

Also under Network Settings is Dynamic DNS. If you have not enabled this function in
the Setup Wizard click the DDNS checkbox to enable Dynamic DDNS. Select your DDNS
server from the drop-down list and fill in the parameters from these fields: Host Name,
User Name, Password, Confirm Password, and Timeout. Click Apply to set these
changes and continue.
TV-IP572P / TV-IP572PI
16