Fishman Fluence Willie Adler Signature Series Install Manual

Installation
1. Plan an installation. We've included two potential wiring diagrams from Willie Adler.
Additional diagrams are available at www. shman.com.
2. Test t the components to make sure that each will t in the allocated locations, or modify
the instrument until the t is correct and all the controls can be located without issue.
3. Fishman Fluence multi-voice pickups require a 9-volt battery or one of the available
Fluence rechargeable battery packs. Check the t of your chosen power method into the
control cavity.
4. The pickup voicing options are selectable by connecting the associated wire to ground or
leaving it oating (disconnected). They can be switch selectable as shown in our standard
wiring diagrams or hard wired if only certain voice options are preferred. By creating a
custom plan with your installer, there can be many additional control scheme possibilities.
5. Once your nal wiring diagram has been chosen and your parts are laid out, complete the
soldering, mount and secure all your components and test your completed installation
before assembly. Be sure the push connectors are plugged in the correct way and that the
little arrow (triangle) imprinted onto the top left side of the connector matches the one on
the connector. Then plug in and play!
Bridge Pickup Peak Frequency:
Voice 1 - 640Hz
Voice 2 - 1.9kHz / 840Hz
Neck Pickup Peak Frequency:
Voice 1 - 2.6kHz
Voice 2 - 4.5kHz, 350Hz
Magnets:
Bridge - Ceramic 8 (Blade/Pole Hybrid)
Neck - Alnico V
Overview
These instructions provide installation options for the Fishman Fluence Willie Adler
Signature Series Pickups. This system includes controls required for a number of different
install combinations. But these instructions are not comprehensive. A skilled electronics
technician may interpret this overview to create a wider range of installation options.
Installation Warning!
By self-installing and/or misusing this product, you understand and agree that and such uses
are high risk activities and, to the extent permitted by law, YOU EXPRESSLY AND VOLUN-
TARILY ASSUME THE RISK OF DEATH OR OTHER PERSONAL INJURY SUSTAINED WHILE
PARTICIPATING IN SUCH ACTIVITIES WHETHER OR NOT CAUSED BY THE NEGLIGENCE
OR ANY OTHER FAULT of Fishman, including but not limited to equipment malfunction
from whatever cause, or any other fault of Fishman. Additionally, you agree to indemnify,
defend and hold Fishman harmless from any third party claims arising from such activities.
INSTALL GUIDE
WILLIE ADLER
SIGNATURE SET
514-300-154_r0 8/16