TRENDnet TV-IP110 User Manual page 35


Ports Number
- HTTP Port: The default HTTP port is 80.
NOTE If the camera is behind an NAT router of firewall, the suggested to
be used is from 1024 to 65535.
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users
within a certain range of IP addresses to access the camera.

Start/End IP Address
Assign a range of IP addresses that are not allowed to access the
camera by entering the Start IP address and End IP address. When you
are finished, click Add to save the range setting. You can repeat the
action to assign multiple ranges for the camera.
For example, when you enter 192.168.10.50 in Start IP Address and
192.168.10.80 in End IP Address, the user whose IP address located
within 192.168.10.50 ~ 192.168.10.80 will not be allowed to access the
camera.

Deny IP List
The list displays the range setting(s) of IP addresses that are not
allowed to access the camera. To clear the setting, select a range of IP
addresses from the list and click Delete.
Network >> Wireless Setting (for TV-IP110W only)
- 34 -