Running The Utility - TRENDnet TPL-101U User Manual

I
NTRODUCTION
The Encryption Management Utility for PLC products enables the user to find PLC devices on
the powerline network, measure data rate performance and ensure privacy by setting a user
defined network private password. This utility gives you the capability to set up a network
password on the local device connected to the computer where the utility is running. It gives you
as well, through the advanced option, the capability to set up a network password remotely on
other PLC devices through the power line.
It is recommended that the same PC chosen for initial execution of this utility remain the PC of
choice for subsequent network encryption updates. Network setup information is stored on the
PC and is used to facilitate follow-on network encryption sessions.
Before running this utility, make sure that a PLC device is properly installed and connected to
your computer.
R
UNNING THE UTILITY
To run the utility, double click the PLC Configuration Utility icon on your desktop.
The wizard has five different dialog screens options accessible through the following tabs:
Device, Network, Security, Advanced and About. In the coming sections, we will explain the
purpose and the functionality of each of them.
NB: As a general rule that applies to dialog screens, pressing:
The OK and Cancel buttons means "exit utility "