Identifying External Components; Led; Wps Button - TRENDnet TEW-648UB User Manual

IDENTIFYING EXTERNAL COMPONENTS
LED
LED Status
Slow Blink (1 blink/second)
Fast Blink (3 blinks/second)
Off
WPS Button
Press the WPS button start the WPS pairing, the LED will begins to blinking for 3
blinks/second, once the connection is successfully established between the AP and
the adapter, the LED will remain in solid for 5 seconds to tell the users that the
connection has been established. After 5 second, the LED will light off to indicate
user that the Access Point or Wireless Router is ready for a new WPS connection
and the adapter is associated with the Access Point or Wireless Router.
Description
When the LED is blinking, the WLAN Adapter is transmitting or receiving data
on the Wireless Ethernet network.
After pressing the WPS button, the LED will flash 3 blinks/second. Once the
connection is successfully established between the AP and the adapter, the LED
will remain solid for 5 seconds to tell the users that the connection has been
established. After 5 seconds , the LED will turn off to indicate that the AP is
ready for a new WPS connection and the adapter is associated with the AP.
User inserts the card into the NB without driver installed, and without
connection.
7