Arbor Technology Animal field shelter V.6 Assembly Instructions Manual

Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you
have the correct components. If for any reason you need assistance, you can find our contact details at
the top of the page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary
Ensure that you have all the correct parts listed on the front page of these instructions, including any fixings.
It's important to note that while mobile field shelters are designed for fields, which often have some degree
of unevenness, it's still beneficial for them to be placed on as level ground as possible.
Package contents
•
4x slides
•
L1-L2 (side) panels
•
R1-R2 (side) panels
•
B1-B2 (back) panels
•
FR-FL-FT (Front) panels
•
F-L, F-R, F-M Roof triangles
•
F-L, F-M Roof covers
•
Roof design endboard
•
Roof front featheredge cover
board
•
14x Rafters
•
Roof panels
•
Roof corners (B-R, B-L, F-R, F-L)
•
Roof middle covers
•
Roof end design covers
•
4x Feather edge covers
•
Necessary screws and fixings
•
Kickboards
•
Metal braces for towing the
shelter
•
Guttering kit (If purchased one)
Apex field shelter assembly
for your convenience all guide holes are pre-drilled.
Press here for the assembly video
Tools required
An electric screwdriver (No.2 Pozi bit) or
Screwdriver.
Hammer
Handsaw
Ladder