Arbor Technology Alleyway shed Build Instructions

Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you
have the correct components. If for any reason you need assistance, you can find our contact details
on the top of the page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary
We cannot stress the importance of putting your new Arbor Garden Solutions building onto a solid,
flat, level foundation enough. Get it right, and your building will fit together perfectly and last for
years. Get it wrong, and you could have problems with assembly. The shed will not last nearly as
long, and the doors may not close properly. Your local retailer may be able to offer a base-laying
service or recommend someone who can.
Package contents
•
L1-L2 (side) panels
•
R1-R2 (side) panels
•
TL-TB (Front top triangle panels)
•
2x F1; 2x F2 panels
•
3x Rafters
•
4x Feather edge covers
•
2x Top Edging strips
•
2x Shorter roof frame planks
•
2x Longer roof frame planks
•
2x Narrower roof OSB sheets
•
2x Wider roof OSB sheets
•
2x Roof felt sheets
•
Doors (Optional)
•
Necessary screws and fixings
•
Base frame
•
Base sheet
Alleyway shed build instructions
for your convenience all guide holes are pre-drilled.
Tools required
Electric screwdriver (No.2 Pozi bit) or
Screwdriver